How to Attach Aluminum Table Legs to Different Table Tops

Aluminum table legs offer a sleek and modern touch to any table, providing both durability and aesthetic appeal. Whether you’re building a custom table from scratch or upgrading an existing one, attaching aluminum table legs is a straightforward process that you can easily complete yourself.

Materials and Tools

Before you begin, gather the necessary materials and tools:

Aluminum table legs

Table top

Drill

Drill bit set (for wood or metal)

Screws or bolts

Screwdriver or wrench

Measuring tape

Level

Pencil or marking tool

Attaching Aluminum Table Legs to Wooden Table Tops

1. Measure and Mark the Mounting Points:

Place the table top on a flat surface and measure the center of each edge.

Mark the mounting points where the aluminum table legs will be attached, ensuring that they are equidistant from each other.

2. Drill Pilot Holes:

Use a drill bit slightly smaller than the diameter of the screws or bolts to drill pilot holes at the marked mounting points.

The depth of the pilot holes should be slightly less than the length of the screws or bolts.

3. Attach the Table Legs:

Align the table legs with the pilot holes and insert the screws or bolts.

Tighten the screws or bolts securely using a screwdriver or wrench.

Check that the table legs are securely attached and level.

Attaching Aluminum Table Legs to Glass Table Tops

1. Use a Support Plate:

Glass table tops require a support plate to distribute the weight evenly and prevent cracks.

Place the support plate on the underside of the table top and mark the mounting points.

2. Drill Pilot Holes:

Drill pilot holes through the support plate at the marked mounting points.

3. Attach the Support Plate:

Use screws or bolts to attach the support plate to the table top.

Tighten the screws or bolts securely.

4. Attach the Table Legs:

Align the table legs with the mounting points on the support plate and insert the screws or bolts.

Tighten the screws or bolts securely, ensuring that the table legs are level.

Attaching Aluminum Table Legs to Marble or Granite Table Tops

1. Use a Pedestal Base:

Marble or granite table tops need a pedestal base to provide additional support.

Position the pedestal base on the underside of the table top and mark the mounting points.

2. Attach the Pedestal Base:

Drill pilot holes at the marked mounting points and insert screws or bolts.

Tighten the screws or bolts securely, ensuring that the pedestal base is securely attached.

3. Attach the Table Legs:

Screw or bolt the aluminum table legs to the pedestal base, following the same steps outlined for wooden table tops.